on Arduino Make a sketch using getPhoto() to control the LED using proportional control.
1) Make a sketch using getPhoto() to control the LED using proportional control. Here is an outline:
a. Set out=0;
b. Loop for k=1 to 100
c. Set analogWrite() to out
d. Wait 100ms.
e. Measure V using getPhoto
f. Serial.println V
g. Define err ie e=Vset-V;
h. Define out=P*e;
i. Make sure out is between [0 255].
j. Serial.println e and out
k. End loop
2) Find the largest value of P=Pmax that does not causes the V to oscillate. How does it compare to your estimate from part I?
3) What is the value of the error for the largest P that will not oscillate?
4) Plot V and out verses step k from above for Pmax, Pmax/2, and
Pmax/10.
5) Add Integral control. Initialize es to 0 before the loop and after line g
above add es=es+e; Then change line h to out=P*e+I*es.
6) Find values of P=P0 and I=I0 that give good control.
7) Plot V and out verses step k for (P0,I0), (P0,I0/10), (P0/10,I0), and
(P0/10,I0/10). You may have to lengthen the k loop to see the full effects. Give a brief explanation of the plots.
RELATED QUESTIONS
RELATED TOPICS
ABOUT ANSWERBAG
Answerbag wants to provide a service to people looking for answers and a good conversation. Ask away and we will do our best to answer or find someone who can.We try to vet our answers to get you the most acurate answers.
Copyright 2023, Wired Ivy, LLC