• first remove the breather to allow access to the bolts then follow the top radiator hose from the radiator to the engine block-this is the thermostat housing-the two bolts must be removed then pull up on the housing to gain acess to the thermostat-pull the thermostat up then place the new one in exactly as the old one was then clean both the top of the intake and the thermostat housing to allow proper instillation -after cleaning the two pieces put the sealant on the gasket attach the gasket then the housing tighten bolts congrads you're done
  • 3-22-2017 You take it to a shop, tell the man "Something about a thermostat," and give him some money.

Copyright 2020, Wired Ivy, LLC

Answerbag | Terms of Service | Privacy Policy