ANSWERS: 7
-
Take a look at this : http://www.tool-up.co.uk/shop/diy/IRW10504634.html
-
by drilling a hole into the center of the head and using an extractor to back it out.
-
Apply heat until cherry red then immediately cool with water, spray with WD-40 and try your luck -- always worked for me..
-
you 'will' it to with the power of your mind.
-
if all else fails,weld a larger nut over it,then remove it.
-
snap on sells sockets called turbo sockets, they are cut in a turbine shape and the harder you twist, the harder they bite in to the bolt head or even stud.
-
goo.gl/yWZpAH
Copyright 2023, Wired Ivy, LLC